NL-1500 SnaplockStanding Seam
GENERAL PANEL INFORMATION
APPLICATION:
Residential, Commercial, and Architectural panels.
COVERAGE:
16” panel coverage, with a 1 1/2” seam height.
MINIMUM SLOPE:
Recommended slope 3/12 or greater.
SUBSTRATE:
Recommended substrate 1/2” - 5/8” plywood with a 30 lb.
underlayment.
LENGTH:
Panels are continuous lengths from eave to ridge.
FASTENING SYSTEM:
Concealed fastener system. Recommended 1 screw spaced 8” o/c.
FASTENERS:
#10 x 1” Zinc Alloy Type A flat head screws.
MATERIALS:
Panels are fabricated from 24 gauge mill finish or pre-painted
Galvalume*.
COATINGS:
24 gauge pre-painted Galvalume* panels available in over 40
colors are coated with a full-strength Kynar 500†
baked-on finish.
WARRANTY:
30 year manufacturer warranty
ADDITIONAL PANEL INFORMATION
-
Panels are also available in 26 gauge Galvalume, Aluminum, and 16 oz. Copper.
-
All flashings and accessories are fabricated from the same coil stock as the panels.
-
Standing seam orders are all inclusive; panels, clips, screws, and all flashings are incorporated into one per square price
* Galvalume sheet uses an aluminum (55%) - zinc (45%) alloy coating that offers greater corrosive resistance, higher temperature oxidation resistance, and higher heat reflectivity than standard galvanized steel.
† Kynar 500 is a premium fluorocarbon coating, produced with full strength Kynar 500 resin. This affords maximum exterior durability due to its outstanding resistance to ultraviolet radiation. These are the highest quality finishes available.