NL-1000 (Nail Strip) Snap-Lock Standing Seam
GENERAL PANEL INFORMATION
Concealed Nail Strip and Fastener, Snap-Lock Standing Seam Panel
| Application: | Residential, Commercial and Architectural panels. |
| Coverage: | 16” panel coverage, with a 1” seam height. |
| Minimum Slope: | Recommended slope 3/12 or greater. |
| Substrate: | Recommended substrate 1/2" - 5/8” plywood with a 30 lb. underlayment. |
| Length: | Panels are continuous lengths from eave to ridge. |
| Fastening System: | Concealed nail strip fastener system. Recommended 1 screw spaced 8” o/c. |
| Fasteners: |
#10 x 1” Zinc Alloy Type A flat head screws. |
| Materials: |
Panels are fabricated from 24 gauge mill finish or pre-painted Galvalume*. |
| Coatings: |
24 gauge pre-painted Galvalume* panels are available in over 30 colors and coated with a full-strength Kynar 500† baked-on finish. |
| Warranty: | 35 year manufacturer warranty on 24 gauge pre-painted Galvalume* panels. |
| Approval: | Florida product approval. |
ADDITIONAL PANEL INFORMATION
|
|
* Galvalume sheet uses an aluminum (55%) - zinc (45%)
alloy coating that offers greater corrosive resistance, higher temperature
oxidation resistance, and higher heat reflectivity than standard galvanized steel. |
|
† Kynar 500 is a premium fluorocarbon coating, produced
with full strength Kynar 500 resin. This affords maximum exterior durability due
to its outstanding resistance to ultraviolet radiation. These are the highest quality finishes available. |