MP-15 Mechanical Lock Standing Seam
GENERAL PANEL INFORMATION
Concealed Clip and Fastener, Mechanical Lock Standing Seam Panel
| Application: | Architectural, Residential, Commercial and Institutional panels. |
| Radius Application: | Panels can be formed for installation on curved substrates. |
| Coverage: | 10" - 28” panel coverage, with a 1 1/2” seam height. |
| Minimum Slope: | Recommended slope 2/12 or greater. |
| Substrate: | Recommended substrate 1/2" - 5/8” plywood with a 30 lb. underlayment. |
| Length: | Panels are continuous lengths from eave to ridge. |
| Fastening System: | Concealed clip and fastener system. Recommended 2 screws per clip with a maximum clip spacing of 16” o/c. |
| Fasteners: |
#10 x 1” flat head screws. |
| Materials: |
24 gauge Galvalume*, .032 Aluminum, 16 oz. Copper. |
| Coatings & Finishes: |
24 gauge Galvalume* and .032 Aluminum pre-painted panels are available in over 30 standard colors and are coated with a full-strength Kynar 500† finish. |
| Warranty: | 20, 25, and 35 year manufacturer warranties available. |
| Approval: | Florida Building
Code product approval. UL-580 Uplift Resistance Test. Class A Fire Rating (UL-790) |
ADDITIONAL PANEL INFORMATION
|
|
* Galvalume sheet uses an aluminum (55%) - zinc (45%)
alloy coating that offers greater corrosive resistance, higher temperature
oxidation resistance, and higher heat reflectivity than standard galvanized steel. |
|
† Kynar 500 is a premium fluorocarbon coating, produced
with full strength Kynar 500 resin. This affords maximum exterior durability due
to its outstanding resistance to ultraviolet radiation. These are the highest quality finishes available. |